■便携式 Microchip 专用高速烧录器 ■支持器件超过 3000 种 ■支持 ISP 烧录 ■并口连接 PC 可选高速 IEEE1284 接口■40PIN 驱动脚位烧录 DIP 封装 IC 无需转换座
概要
◆ PIKprog 是 ELNEC 基于 Windows95/98/ME/NT/2000/XP 界面的专用烧录器中的新一代成员.
◆ 支持 Microchip 系列和 PICmicro 系列当前常用的微控制器 (840pin),使用并行或串行算法.
◆ 它不是发展成一个有档次的烧录器,而是满足所有对有档次烧录器厂商微芯片的要求.
◆ 它跟MicrochipTM公司密切合作,因此烧录器的硬件支持所有当今的和未来的 PICmicro微控制器家族 .
◆ PICProg+ 是一款小巧的、快速的、非常轻便的烧录器,支持 PICmicro 微控制器家族、系列 EEPROM: 包括 IIC(24CXX) 、 Microwire(93Cxx) 、 SPI(25Cxx) 等 .
◆ 使用内置的 ISP 连接器的烧录器通过系列算法能烧写 PICmicro 微控制器家族.
◆ 提供富有竞争力的价格,为高可靠性烧写设计极好的硬件.从这一点上来说具有良好的性价比.
◆ 由于高速 FPGA 硬件驱动和 IEEE1284(ECP/EPP) 高速并口的支持 , 有着非常快的烧写速度.
◆ 从这一点上说肯定比同类竞争品要快.PIKProg+ 通过任何标准并行(打印机)口( 不需其它专用接口 ) 就能连接 IBM486 或以上的 PC 、手提式的、个人桌面电脑 . 因此不需装配 / 拆卸 PC 很方便的从一台移动到另一台PC.
硬件
◆ 40个强有力的 TTL pin 驱动,为每一个测试座上的pin脚提供 High/Low/Pullup/Pulldown/read功能 .
◆ 先进的驱动技术结合高速高质线路的可靠性能.
◆ 最低支持电压低至 1.8v,因此您可以用它烧录当前世界上所有流行的低压器件.
◆ 烧录器提供插入测试和接触测试在进行烧录之前,并可以防止因放置不当接触不好造成的芯片损坏,这些性能通过流量检查因误操作阻止芯片损坏.
◆ PICProg 烧录器执行边沿级别的电压烧录校验,这样能明显的提供烧录领域,保持长数据 .
◆ 各种各样的适配器支持各种 IC 封装,例如 :PLCC,SOIC,SSOP,TSSOP,TQFP 和其它封装等 .
软件
◆ 这款烧录器容易使用并进行控制,具备下拉菜单,快捷键和在线帮助.
◆ 选择器件可以通过选择分类,制造厂商,型号,序列号等多种方法进行.
◆ 相关的标准烧录操作命令 (read, blank check, program, verify, erase),
◆ 还有一些测试功能 ( 插入测试,流量检测 ),
◆ 也包括一些额外的功能如 (autoincrement,product 模式 - 在插入芯片以后立刻开始烧 ). 支持所有已知的数据格式,当导入文件时能自动识别并转换合适的文件格式 .
◆ 自动递增烧录功能可以在每一颗 IC 中分配不同的序列号,也可以简单的递增序列号,也可以选择从用户自己的文件读取序列号 .
◆ 烧录器软体提供详尽的 IC 讯息包括画的各种有用的封装,芯片标签的说明 ( 前缀和后缀的意思 ).
◆ 烧录器软体提供详尽的 ISP 讯息,包括为当前所选 IC 的 ISP 接口定义,IC 周边电路建议设计,以及其它必要讯息 .
CARE FOR THE CUSTOMERS
· It is important to remember that support of new devices with compatible GND/VCC/VPP pinout requires only a software update due to the PIKprog+ hardware. With our prompt service you can have a new device added to the list of supported devices within hours! Free software updates are available by download from our WEB site.
· Keep-Current and AlgOR services, our next step towards customer satisfaction.
· Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer . The Keep-Current service is your hassle-free guarantee that you are achieving the highest quality programming on ELNEC programmers, at minimal cost.
· AlgOR (Algorithm On Request) service gives the user a tool to influence to amount and types of programmed devices as needed.
Specification
HARDWARE
Programmer
· two D/A converters for VCCP and VPP, controllable rise and fall time
· VCCP range 0..7V/250mA
· VPP range 0..15V/150mA
· FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
· autocalibration
· selftest capability
ZIF socket, pindriver
· 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
· pindriver: 40 TTL pindrivers, special GND/VCC/VPP pindriver for PICmicro ? devices
· spare GND, VCC and VPP driver, which add additional made-by-wire GND/VCC/VPP pin capability for future devices
· FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins, level H selectable from 1.8 V up to 5V
· continuity test: each pin is tested before every programming operation
ISP connector
· 10-pin male type with missinsertion lock
· 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
· 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA)
· programmed chip voltage (VCCP) with both source/sink capability and voltage sense
· (*1) - the programmer is not capable to supply a target system from VCCP pin. If you have such demand, use please a BeeProg programmer
DEVICE SUPPORT
Programmer, in ZIF socket
· microcontrollers Microchip TM PICmicro ? : PIC10xxx, PIC12xxx, PIC14xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series, 8 to 40 pins (*1)
· Serial E(E)PROM: 17Cxxx, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx series
Programmer, through ISP connector
· Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series Notes:
· (*1) - suitable adapters are available for non-DIL packages and devices with more than 40 pins.
· for all supported devices see actual DEVICE LIST
Programming speed
Note: The programming times of the programmer, attached to PC through LPT port, depends a bit on PC speed, LPT port type and operating system free resources. Look at ELNEC programmers, tips to increase of programming speed application note for details.
Device |
Operation |
Mode |
Time |
PIC16C67 |
programming and verify |
in ZIF |
12 sec. |
PIC18F452 |
programming and verify |
in ZIF |
8 sec. |
PIC16F876A |
programming and verify |
ISP |
6 sec. |
PIC12C508 |
programming and verify |
ISP |
4 sec. |
Conditions: P4, 2.4 GHz, ECP, Windows XP.
SOFTWARE
· Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.
· Algorithm updates: software updates are available approx. every 2 weeks, free of charge.
· Main features: revision history, session logging, on-line help, device and algorithm information.
Device operations
· standard:
· intelligent device selection by device type, manufacturer or typed fragment of part name
· blank check, read, verify
· program
· erase
· configuration and security bit program
· illegal bit test
· checksum
· security
· insertion test
· contact check
· ID byte check
· special
· auto device serial number increment
· statistic
· count-down mode
Buffer operations
· view/edit, find/replace
· fill, copy, move, byte swap, word/dword split
· checksum (byte, word)
· print
File load/save
· no download time because programmer is PC controlled
· automatic file type identification Supported file formats
· unformatted (raw) binary
· HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX
GENERAL
PC system requirements
· Common, software related requirements
· Programmer hardware related requirements:
· one (parallel) printer port with nothing attached, the IEEE 1284 compatible printer port (ECP/EPP) on PCI bus recommended
Operation
· operating voltage 12..15V DC, max. 0.5A
· dimensions 137x65x40 mm (5.4x2.6x1.6 inch)
· weight (without external power adapter) ca. 200g (7.06 oz)
· temperature 5°C ÷ 40°C (41°F ÷ 104°F)
· humidity 20%..80%, non condensing
Base configuration package includes
· PIKprog+ programmer
· wall plug adapter, 12V DC/500mA, unstabilized
· connection cable PC-programmer
· ISP cable
· diagnostic POD for selftest of the programmer
· anti-dust cover for ZIF socket
· user manual
· software
· registration card
· transport case
Additional services
· Keep-Current - ELNEC sends to user the latest version of programmer software and updated user documentation (Keep-Current package).
· AlgOR - new supported devices on customer request
Programmer price also includes
· free technical support (hot line)
· free life-time software update via Internet The information in this document are subject to change without notice.
|